Time: 2023-10-09
Recently, research institution n.t. information released PCB share data for 2022, with a global PCB output value of approximately 88 billion US dollars in 2022, a year-on-year increase of 10%. Among them, Taiwan, China ranked first with a market share of 31.97%, and Chinese Mainland ranked second with a share of 31.52%, which combined exceeded 60%.
Read More
Time: 2023-09-28
作为一家专业的线路板生产公司，我们非常高兴向您介绍我们的核心产品——HDI线路板，将为您的电子产品注入生产优势。本文将带您深入了解HDI线路板的独特优势，为您的产品提供突破性的性能和可靠性。
Read More
Time: 2023-09-25
Notice of Mid-Autumn Festival/National Day Holiday
Read More
Time: 2023-09-09
According to TrendForce's "Global Automotive PCB Market Outlook" research, due to the fact that PCBs account for more than half of consumer electronics applications, the economic headwind has had a more significant impact on the PCB industry compared to other components, with an estimated global PCB output value of approximately $79 billion in 2023, a 5.2% decline compared to 2022.
Read More
Time: 2023-09-06
When dealing with hardware, it is inevitable to encounter some PCBA pins or network short circuits. The most difficult and challenging issue among them is the problem of power short circuit, especially when the board is relatively complex, there are many circuit modules, and chips such as BGA are not easy to measure, but also when there is a 3.3V short circuit.
Read More
Time: 2023-05-29
If we encounter humidity sensitive electronic components in the processing of PCBA, we must attach great importance to them. Due to improper management of humidity sensitive components, it can directly lead to poor soldering, resulting in various defects such as poor soldering, solder connection, and insufficient soldering. So what are the management methods for humidity sensitive components in PCBA processing? The management of humidity sensitive components is mainly carried out from two aspects: storage and feeding. Each humidity sensor has its own MSL……
Read More
Time: 2023-05-29
Due to the increasingly high functional requirements of products, ordinary single panels can no longer meet the functional requirements. At this historic moment, double-sided printed PCB circuit boards have emerged, which means that the wires on both sides of the circuit board are typically made of epoxy glass cloth copper clad plates, which are typical for manufacturing double-sided perforated printed boards in fields such as communication electronic equipment, advanced instruments, and high-performance electronic computers……
Read More
Time: 2023-05-29
Almost every industry produces counterfeit products. It is not surprising that counterfeit parts have become a problem in the electronics industry. Although governments, enterprises, and other stakeholders have been trying to prevent counterfeit and inferior products from entering the market through various means, sometimes they can also successfully enter the market. These counterfeit components may cause product performance issues and safety risks.
Read More
Time: 2023-05-29
Have you noticed that some boards are no longer flat after assembly? Or is the bare board you received not completely flush? PCB warping is a general term used to describe irregular PCB shapes, independent of the shape itself (bending, bending, twisting, etc.). A major challenge is that during the welding cycle, a plate may transition from flat to warped, so it cannot always be grasped by hand. because……
Read More
Time: 2023-05-29
With the development of technology and the increasing complexity of PCBA, it is necessary to carefully consider the testing and inspection options for these boards. PCB is a critical component that is expected to function normally in various environments. Appropriate testing procedures and inspection measures are needed to maintain product quality and reliability.
Read More
Copyright © 2023 Grandbright Precison (Shen Zhen) Co., Limited All Rights Reserved
